Ask Experts Questions for FREE Help !
Ask
    Euphoria29's Avatar
    Euphoria29 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2012, 07:07 PM
    Why did my bryant evolution thermostat systxbbuiud01 go blank?
    Ac just shut off and thermostat went black. Checked the circuit breaker and that' fine. What else could it be?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 14, 2012, 09:14 PM
    Battery in the 'stat? Checked or changed?
    nyah's Avatar
    nyah Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jul 11, 2012, 01:50 PM
    I am experiencing the same issue. There are no batteries in the Bryant Evolution Thermostat/Control. I have flipped breakers, checked internal fuses on the furnace and AC, and replaced the stat with a new one. I am still without AC - still no power to my Bryant Evolution Thermostat/Control. I am going on the third repair guy now to see if he can figure it out. Any input on a resolution to this is appreciated!
    dmusselm's Avatar
    dmusselm Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 8, 2012, 09:56 AM
    I'm having the same problem. Any chance you got yours fixed or figured out what the problem is? I was told $830 for someone to replace the thermostat for me or $480 for a new one with no warranty. I'd really like to just buy a cheap one at least for the winter if I know that's all it is.
    jrandomuser's Avatar
    jrandomuser Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Nov 25, 2012, 09:31 PM
    Check the GFI outlet that the condensate collector (little black and red box) is plugged into. If that trips, it shuts down the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Code 42 and 33 on bryant 95S with Evolution thermostat. [ 1 Answers ]

Hello Bryan furnace experts. This is kind of stupid since it is now warm out and I am finally getting around to the error codes that appear on my Evolution thermostat connected to a Bryant 95S furnace model 355CAV. This furnace has received code 42 - inducer errors (36 of them) and 33 - Limit...

Bryant evolution thermostat reads requires maintenance? [ 2 Answers ]

Does anyone know what to press on the Evolution Thermostat to see what the installers can see? I found the Installation instructions online, but when you want to look at that part, it says that it is for installers only. I got a requires maintenance code and called for service. I know that this...

Bryant heating evolution thermostat troubleshooting? [ 2 Answers ]

New system (installed 6/2009): 2 zones, Bryant Evolution Control thermostat. Control panel regularly shows "system malfunction" reading with several "active events" recorded, although heating continues. Certified Bryant repair person here several times, but can't determine the problem. Says the...

Bryant Evolution Thermostat [ 1 Answers ]

We have a Bryant Evolution system. Its only about a year and a half old. Was installed by the homebuilder. About 2 days ago it I noticed the reading on it said "cooling at 42" and we can not manually change the temp. to cool back up to 73 degrees. The up button for the temp. will not work to...

AC Temperature Variation Bryant Evolution Thermostat [ 1 Answers ]

I have a Bryant Evolution Control Thermostat (SYSTXBBUID01-B). I've noticed while running the Air Conditioner the condenser comes on sooner than it should. For example, the temperature is set to cool at 79 degrees; the actual temperature shown on the thermostat reads 77 degrees, yet the condenser...

View more questions Search