 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2003 ford escape v6, 4x4 transmission is not engaging
First, the od light started blinking. Is not blinking anymore, but then the transmission began having problem. It not engaging right away or when shifting from drive to reverse it does not engage right away. It may take almost a minute to engage. Something is very wrong with my vehicle.
|
||||
|
||||
|
Since the CD4E, 4-Speed transmission filter is not serviceable, without the transmission being disassembled, the transmission may be full of crud. Try dropping and cleaning the pan and changing the fluid (Mercon V) several times. If this does not help, the ATX likely needs rebuilding. Personally, I would change the fluid every 30,000 miles, using Mobil 1 Synthetic Multi-Vehicle ATF.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Shifting into reverse or drive makes the car feel like a standard shift when you don't give it enough gas. It starts shaking and rumbling then stalls. It just started doing this a couple of days ago. I have to shift into neutral at stop signs and traffic lights. Also when I give it a little gas...
What happens when there is way too much Fluid in the transmission?
My vehicle will not go into drive or reverse but has never should any issues with the transmisssion
I'm new to this site and this my first post... My 1999 windstar does not do anything when shift to any gear. There is no change in engine Rpm when I shift it to R or D is my transmission gone? And another question... What is the function of transmission range sensor? Thanks
Well I went to see my mom over the weekend and parked my truck at an incline for 3 days. Then I got in it and started driving home, and about 75 miles into a 300 mile trip, the O/D light started blinking on the dash. Not thinking much of it, I kept driving. When I stopped for a rest about 160...
View more questions Search
|
