 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Converting 110vac to 100vdc (100 wattas)
I have a wide belt sander that has a 110 vac main motor for sanding and a 100vdc
motor (100watts) that runs the conveyor. The variable speed control in gone on the conveyor and I really do not need speed control so I would like to run at any fixed speed. So how would I hook up a rectifier and what parts are needed? |
||||
Check out some similar questions!
I have a 220VAC single phase 30 amp circuit that I would like to split into two 110VAC circuits. The 220VAC circuit has 3 wires and if I measure across the two main terminals I get the 220VAC and if I measure between a main terminal and what appears to be ground, I get the 110VAC. If I take one of...
Is it possible to convert a 220vac, 10AWG, line with only 2 black hot wires and a bare ground wire to a 110vac line? Can the source at the main junction box, which has a 2-pole CB, be rewired to replace the 2-pole breaker with a 1-pole breaker and grab the neutral at the main box by connecting...
I am looking to purchase an older home that currently has 100 amps running to it, an inspector advised me to have it upped to 200. What can I look for in cost and work effort?
I have 110vdc motor off exercise treadmill ; want to make grinder; how to convert acv110 to dcv 110 to use motor. Will diodes from car alternator be strong enough?
Hello All, How can I convert my hp laserjet 1200 printer (110V ac ) to 220V ac. Its of 3A and 300 Watts. I can't put a step down transformer in it. That's why I need to do it electronically. If someone can help me with the schematic, I will be very thankfull. Best Regards. Rashid Ansari
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
