Ask Experts Questions for FREE Help !
Ask
    Jlh1738's Avatar
    Jlh1738 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2012, 06:34 PM
    Zero turn 54 in deck
    Even with new blades it doesn't really mow nice leaves two strips and in middle seems there is a 7 inch strip that's looks a bit lower
    dogdeville's Avatar
    dogdeville Posts: 69, Reputation: -4
    -
    		  
    #2

    Jun 8, 2012, 07:32 PM
    Put mower on a level concrete slab and get a tape measure and check to make sure all blades are the same height off slab. Something is bent. You know its not the blades it may be deck etc
    dogdeville's Avatar
    dogdeville Posts: 69, Reputation: -4
    -
    		  
    #3

    Jun 8, 2012, 07:36 PM
    [QUOTE=dogdeville;3145719]Put mower on a level concrete slab and get a tape measure and check to make sure all blades are the same height off slab. Something is bent. You know its not the blades it may be deck etc[/ QUOTE]also make sure your center bladed is bolted on right your washier may be backwards
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

JUst changed my cub cadet tractor to deck belt but my deck belt won't turn the blades [ 0 Answers ]

Can

Changing belt on wizard 14 hp 42 in cut craftsman deck replacing linkage on deck [ 1 Answers ]

How do I replace linkage rods on mower deck on a wizard 14 hp 42 in. craftman deck.

Mower deck belt routing John Deere 420 - 50inch deck [ 3 Answers ]

Hi - I am looking for help on the routing for deck belt for John Deere 420 with 50 inch deck. Any help would be appreciated. [email protected] Thank you ! Steve

Deck top. We have a covered deck, planning on expanding deck, a 2x4 crossed cover [ 1 Answers ]

help!! We are planning on expanding our original deck with an open 2x4 crossed cover... do you have pictures or construction help?? Thanks

Deck tables, tributary load, and beam size for deck [ 4 Answers ]

I am confused with "deck tables" from different sources, specifically concerning beam size for a deck. I am planning a basic deck as shown: 9677 Sources that describe the "tributary load" and "tributary length" would allow me to use as little as (1) 2x6 for the "front beam" (tributary...

View more questions Search