Check out some similar questions!
Blower motor makes humming noise, no run mode
[ 0 Answers ]
Hi, I have Bryant 394GAD036075 carrier day & night furnace system. This unit was working fine as we start roofing work after that my furnace is not working any more. Problem deatils: Everything comes as per heating cycle, burner goes on and off , blower motor tries to blow but just making humming...
Relay keeps blowin/sparkin in heatpump air handler when in heat mode
[ 0 Answers ]
Already replaced one relay. It ran for an hour and then blew again
Blower motor won't turn on in automatic mode it only turns on in manual mode
[ 4 Answers ]
I have a ruud furnace and it won't turn on when set on "auto" mode,its only turning on in "manual" mode and blows heat.The fan turns on when put in the "on"/"fan" mode. I have to turn it off manually once the rooms have reached the desired temp.I could here the blowers start than they shut off...
Blower motor won't shut off in heat mode but works fine in A/C mode
[ 0 Answers ]
I have an older lennox unit that is pilot light. The blower motor won't shut off when the temp is reached on the thermostat but it works fine in ac mode. What could cause this? I'm confused because it worked 2 weeks ago when I turned my ac off and the thermostat is in auto and only shuts off when I...
Carrier A/C Blower will not come on in A/C mode but works when in heat mode
[ 3 Answers ]
I need some guidance. I have a Carrier A/C unit that has been working fine. Last night the fan stopped working for some reason in the A/C mode. But when I put the heat on, it works fine. The compressor and condenser work fine but the A/C fan just will not kick on. I thought it might be the... View more questions Search
Add your answer here.
|