Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
DSC PC 1832 programming troubles
[ 9 Answers ]
Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...
Can dsc 1832 armed without phone lines
[ 2 Answers ]
I Just got a DSC PC1832 panel with RFK5500 keypad. I just turned the system on And the buzzer goes on. When I do *2 it says view trouble phone line. I don't want The hook to phone line will it work without phone line and how to to stop the buzzer.
Entry delay not working on my new DSC 1832
[ 1 Answers ]
I installed and programmed a new 1832 panel. I set delay 1 at 30 sec, delay 2 at 45 sec and exit delay at 60 sec. The zone is set at delay 1. The exit delay works fine, but I get no entry delay at all. Alarm goes off as soon as the door is opened. Any ideas?
Trouble with DSC 1832 programming
[ 3 Answers ]
Recently I have installed dsc 1832 security system . So far I have done good. But I can not solve my smoke detector problem . Smoke detector is FSA-410BT 4-wire . I have run cat5 wire for this connection . The reason is simply - I had left over cat5 . I have used Bro for 12v+ and BLU for GND....
Dsc 1832 resistor value
[ 1 Answers ]
I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help? View more questions Search
|