Ask Experts Questions for FREE Help !
Ask
    Simoncoxall's Avatar
    Simoncoxall Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 21, 2012, 11:52 AM
    Clutch on a new shape mondeo tdci
    When I press the clutch in the engine vibrates... I have had the clutch replaced and it still does it !
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    May 21, 2012, 01:03 PM
    Did the engine vibrate, when the clutch was depressed, with the old clutch? Was the pilot bearing and the release bearing replaced, when the clutch was replaced? Was the correct clutch kit installed? Were all bolts torqued to spec? Did the mechanic warranty the work?

    If everything was done right, the problem may be with the Dual Mass Flywheel (DMF). They have been problematic and haven't lasted very long. Consider the pros and cons of installing a solid flywheel (LUK or Performance). My bet is there's a problem with the DMF.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I reduce my face shape is very big can my face shape like ovalshape [ 4 Answers ]

My face size is very big can you suggest how can I reduce this I want my face shape is oval

How to build pressure 2001 honda civic clutch slave and clutch master [ 1 Answers ]

I have replaced clutch slave and replace the clutch master kit... tried bleeding it but there is no pressure, How do I get pressure to build... also clutch pedal is stuck and won't retract.

How to cancel in shape In-shape contract? [ 4 Answers ]

Hi I signed up for a 3-year contract. The monthly payments are pretty pricey. And the gym isn't even open 24-hours. It has already passed 3 days and I told them I wanted to cancel my contract. They told me of only two things that can make that happen which is moving 25 miles away or death. Even if...

Power loss on 2.0 tdci 130 zetec [ 1 Answers ]

I have a ford mondeo 2.0 tdci 130 zetec, when driving at a constant speed e.g 30 40 or even 70. The car will begin to jerk as if there is a miss fire and when trying to accelerate from 60-70 the car will struggle to reach the greater speed can any body help with this problem? The car is on a 54...

94 mondeo starting problems [ 1 Answers ]

This problem started as intermittent but has got much worse, so I now feel lucky when my car starts. When I turn the key, the dash lights come on as normal, there is a noise under the bonnet like a fan whirring, but no spark, so the engine doesn't turn over. I used to just have to turn the key a...

View more questions Search