Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water heater: Should may bottom element be getting only 120volts?
[ 1 Answers ]
Was getting very little hot water out my dual element 240volt WH... drained it, clean out sentiment, inspected elements I had put in a year ago - OK. When refilled & plugged in I put a tester on the elements & noticed only 120 volts on bottom element. Is this normal or should the bottom element be...
Burnt red wire to the heating element to hot water heater. (electric).
[ 2 Answers ]
Burnt red wire to the heating element. Cover has been off after I replaced the heating element 18 months ago. I did have this problem about two months ago when it appeared that the red and black wire touched each other . There was the burnt smell and melting. I cut off the burnt parts and...
I have a switch with power to it and wire going to a light,a wire going to outlets
[ 3 Answers ]
I have a switch box with power to it and wire going to a light to the left out of the switch box and a wire going to outlets to the right out of the switch box. How do I wire the switch to make both the light and the outlets work properly?
How to wire a water heater
[ 4 Answers ]
I am wiring a water heater that has 240v with 10/2 wire to it. The water heater has a black and red wires coming out of it How doi hook it up
Fuse wire cannot be used as a heating element in a heater?
[ 1 Answers ]
A fuse wire cannot be used as a heating element in a heater ? View more questions Search
|