 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2000 mercury sable engine codes
Getting an intermittent P0171 & P0174 Codes. After doing the following:
1. Replace All Spark Plugs with Bosch Platinum 4 2. Replace all intake seals in Intake Manifold 3. Replace all vacuum lines 4. Replace PVC vacuum line 5. Replace Idle Air Controller 6. Replace both Temperature Sensors 7. Clean Throttle Body with Cleaner 8. Clean Mass Air Flow Sensor with proper Cleaner 9. Replace Air Filter 10. Replace Main Fuel Filter 11. Reset All codes in Computer (there was never an engine light nor codes) 12. Fuel Pressure check at test point on Fuel Rail. (no pressure) Weird? 13. Replaced the MAF (Mass Air Flow) Sensor. Any Ideas? Car runs great despite. Perhaps EGR? |
||||
Check out some similar questions!
A couple of weeks ago, my car wouldn't start after sitting in a parking lot in cold weather for a couple of hours. (I park it in an unheated garage at home). I had it towed to a garage and after sitting in their garage overnight, it started for them. They checked it over and found that it needs a...
Where is the switch
How to replace the Voltage Regulator mercury sable 2000
I just bought a 2000 Mercury sable. When pressing the lock/unlock buttons on the door or remote, doors do not lock or unlock. The motors or relays sound like the doors locked or unlocked, but they do not actually lock. Any ideas or suggestions?
Two questions: I have a 2000 Mercury Sable fully loaded; 1) My driver side door will not open or unlock with the keyless entry or remote. I tried to manually open the door with the key and it will not unlock... what is the problem and how can I fix it? 2) The power locks in the car will...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
