Ask Experts Questions for FREE Help !
Ask
    clancyf's Avatar
    clancyf Posts: 1, Reputation: 1
    New Member
     
    #1

    May 10, 2012, 09:58 AM
    Ceiling fan pull switch - chain broke.
    Going to change ceiling fan pull switch. Old switch has 4 wires that run into a small black box.

    The "3way fan pull switch" I bought from hardware store has only 3 wires .

    Can I use this switch?
    How to wire it?

    CF

Check out some similar questions!

How to fix a ceiling fan pull chain that broke off inside? [ 1 Answers ]

Now the fan runs 24/7 and I can't turn it off because the pull chain was the only switch. I can still turn the light on and off by the other pull chain. Do not know what brand it is, but it is not flush to the ceiling, but hangs from a short poll.

How do I reconnect the pull chain in my ceiling fan switch? [ 1 Answers ]

My ceiling fan pull chain broke off inside the switch. It's a Well Tec switch, model e116997. I have my fan motor housing open and I have identified the Well Tec switch... but I can't figure out how to get the remaining brass balls (I think there are 2-3) out, and get the remaining pull chain...

My ceiling fan pull chain switch for the light [ 1 Answers ]

My chain broke off in the switch, it has an L 1 2 3 on the switch with 3 wires, #1 is a blue wire, #2 is a black wire and #3 is a red wire. I don't know what the numbers mean, unless it's a 3-way switch for 3-way bulbs, I don't care about the 3-way stuff, I just want off & on. Our local Wal Mart...

Pull chain switch on ceiling fan w/light [ 1 Answers ]

At one time a manufacturer made a helper lever to turn on a light on this kind of light but cannot seem to find it. It fitted right on the switch with an extension so it could be pulled on and would retract into the swith with out hanging up. Anyone lknow of this ltype of helper?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.