Check out some similar questions!
"T" sat wiring for york gas furnace control board.
[ 3 Answers ]
I have maple/chase programmable "T" stat... Two stat wires going to control board (Note:.. this board operates heat/ac) wire #1 yellow, red, white, green.. wire #2 red, white. Board terminals Y1, Y/Y2, W, R, G, C... What is the correct wiring for wires #1&2 to terminals.. Thanks in advance for...
Heat pump wiring?control board
[ 2 Answers ]
I got a call for replacing a T-stat... (for home). The York heat pump... after replace with the new one. I found the blown fuse at the airhandler... changed... now I have the blower up and now the electric heat is temporarily used but the unit outside is not running... In heating mode : the unit...
Wiring fan from thermostat to control board?
[ 10 Answers ]
Hi all. I just installed a new thermostat thinking this would solve my problem of not being able to engage the fan using the old thermostat (using "on" or "auto".) I was wrong. I'm getting the same behavior with the new thermo. According to another HVAC forum, it turns out the reason I...
Wiring question for new blower control board
[ 1 Answers ]
Just bought the Lennox blower control board replacement kit - 31M73 I'm stuck on wiring the transformer--- The five wires coming out of the transformer going to the old board are - Yellow - common Blue - 24 vac Orange-L2 XFMER Primary Black - L1 XFMER Primary Red - PARK View more questions Search
Add your answer here.
|