Ask Experts Questions for FREE Help !
Ask
    warren13's Avatar
    warren13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 5, 2012, 05:55 PM
    Kenmore 70 series washing machine
    My kenmore 70 series washer has stop allowing the water to fill the machine, it just starts to aguate
    Chic_Bowdrie's Avatar
    Chic_Bowdrie Posts: 54, Reputation: 8
    Junior Member
    		  
    #2

    May 5, 2012, 09:35 PM
    Quote Originally Posted by warren13 View Post
    My kenmore 70 series washer has stop allowing the water to fill the machine, it just starts to aguate
    I'm not familiar with a Kenmore 70 series, but have cleaned filters in the feed hoses several times when filling started taking a long time. That might be your problem. Does the same thing happen regardless of whether you fill with cold or hot water?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    May 6, 2012, 09:16 AM
    The water level switch is stuck closed. You want to also check the screens in the water inlets, but that would not cause it to start without filling first.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 70 Series Washing Machine [ 3 Answers ]

Problem: Fill level. Water does not reach maximum level. How can this be fixed? Everything else (except water level) works fine.

Kenmore 90 series washing machine [ 0 Answers ]

Turn on cycle to start, it fills with water and agitator is on all the time at same time... stops and does not spiin It does not fill with water, then start as it is supposed to do

Kenmore 70 series washing machine [ 0 Answers ]

I put a wool bath mat in it which disintegrated in the washer. After that the machine doesn't agitate and although it empties the water the clothes are still really wet

Kenmore washing machine 80 series [ 1 Answers ]

Response back about model number I posted a question about a leak coming from underneath my washer. Possibly the water pump or hoses. Does anyone know or can send me a diagram of how to open the top lid and/or remove the cabinet sides so I can do the inspection. Short of just flipping the...

Kenmore Series 80 Washing Machine [ 1 Answers ]

My Kenmore Series 80 Washing Machine which is only 13 months old, is not turning on. It stopped in the middle of a cycle and is full of water which will not drain. Any suggestions on how to drain the water and get this thing going again?

View more questions Search