 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I have a Kenmore Gas Range. My manual has the following model numbers on it: 790-75922, 790-75923, 790-75924, and 790-75929. I was trying to reset an option and pressed the "stop/clear" button and held it for a few seconds. The door locking mechanism started to engage, so I opened the...
I get three red flashes from the furnace after an attempt sequence when the t-stat calls for heat. The motor starts, and seems to try to light but after about thirty seconds, it quits and gives the error code. I have removed both gray tubes from the pressure switch and made sure they are...
Brand new ducane gas furnace has this error any suggestions?
I have a mueller climatrol furnace in which the gas valve won't open or stay open. We think it is electrical problem. Back in the summer, my air went out and a friend did wiring to bypass so the air would work for time being. At that time, before the bypassing to get air to work, the heat...
I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...
View more questions Search
|
