 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan wiring
Old home. From ceiling comes white, ground, red & Black. Everything is controlled by a switch. My fan comes white, blue & black. I understand ground to green and white to white, Should the blue (fan) go with black or red? And the Black (fan) to black or red?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hunter ceiling fan with light; wall switch has one switch that goes to light and one switch that goes to fan. There is one white wire and one black wire coming from switches into fan receiver. There is a blue and white wire going from receiver to light. There are 4 wires going from receiver to fan,...
Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...
I just puchased a harbor breeze ceiling fan w/ 2 lights. I have 4 wires(black,white.red and grd) out of ceiling box. The fan has blk, what, blue, and ground. Connected blk to blk, what to what, grd to grd, and red to blue. Have power to the fan from wall control to turn on/of and change speeds, but...
We have put in a ceiling fan w/light kit attached in our kitchen. To set the scene, we have 2 lights, 2 switches plus the ceiling fan (which was a regular light). The switches are 3 way and will turn all the lights on or off. When we wired the fan, we capped of a black and a white and grounded...
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
View more questions Search
|
