Ask Experts Questions for FREE Help !
Ask
    guillechava's Avatar
    guillechava Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 28, 2012, 09:16 AM
    A/C problem on a 2002 nissan frontier
    My a/c blows could and hot, could and hot on and on.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Apr 28, 2012, 09:22 AM
    Focus on the blend door actuator.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nissan frontier rear differential? [ 4 Answers ]

I have a 2000, Nissan, Frontier, XE, 2WD, pickup. I let a friend use my truck while I was deployed overseas; when I got back I noticed a clicking/popping sound in the rear end when I would slowly turn into parking spots. It gradually got worse, starting to whine when I would let off the gas on the...

2001 Nissan Frontier Overheating [ 6 Answers ]

My truck was overheating about six months ago. I ended up replacing the water pump, thermostat and radiator. Well it worked. The other day I was driving and the bottom hose coming from the radiator popped off causing it to overheat. I towed it home and put it back on filled it with water and...

2006 Nissan Frontier Misfire [ 2 Answers ]

My 06 Frontier 4.0 V6, feels like it has a misfire at low RPM's between 40 and 50 MPH. This is the only time it happens. I've replaced plugs and wires. It hasn't gotten any better or worse. What else could this be

Will a 02-04 Nissan Xterra hood bolt right on a 2000 Nissan Frontier with no mods? [ 0 Answers ]

I've seen it done before online and in magazines. As far as I can tell comparing the two side by side; everything looks identical except the headlight cutouts which I intend to fill. I think it would add a bold custom look. Just wondering. Thanks for your time!

'03 Nissan Frontier Misfire [ 1 Answers ]

I have 2003 Nissan Frontier w/ 4cyl. Auto. The engine shudders under light acceleration at low rpm. If I press the pedal on down or let off completely it seems to smooth out. I am getting a code for " cylinder # 1 misfire". I replaced plugs, wires, cap and rotor with no noticeable improvement. My...


View more questions Search