 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No heat in 2 zones
I recently renovated a home and installed a new weil mclaen high eficiency boiler with 5 zones. 2 zones continue to shut down. After purging they work for a few days to a week and then they shut down again. No visible leaks anywhere. Recently we discovered that the pressure relief valve was bad. Could this have been the culprit?
|
||||
Check out some similar questions!
Have a two zone heating system and both not working. AT first only 2nd floor was getting heat. Someone suggested replacing the circulating pump. I changed it, bled the pipes and now both zones are not getting heat. What can be the problem?
Downstairs thermostat is kicking the heater on but there is heat coming out of the upstairs zone to the extent that the upstairs is getting quite warm because it has to help heat downstairs. I flipped the two thermostats, no change. I checked the controller on the furnace and no errors. I'm a lay...
Downstairs thermostat is kicking the heater on but there is heat coming out of the upstairs zone. I flipped the thermostats, no change. I checked the controller and no errors. I'm a lay person, but due to a tight budget I need to try and resolve this myself. Thoughts?
I live in a 2 story (plus basement) single family home and am trying to determine the most efficient (energy and cost) way to heat my home in cold weather. I have 2 heating/cooling zones - a gas furnace which heats the basement and first floor, and heat pump for the 2nd floor, where the bedrooms...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
