 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cal spa heater not working
Hi, I have a 2004ish used calspa. The gfci tripped and keeps tripping. I cleaned the wire terminals and installed a new gfci breaker, unplugged the spa pack inputs one by one and it still tripped. So I opened the spa pack and removed the heater leads from the terminals and the gfci does NOT trip now and the motors fired up. Do I have a bad heating element that shorted out? What caused this? Where do I take it from here?
Much appreciated!! |
||||
Check out some similar questions!
I have a calspa with a whisper 5000 it will not heat up past 89 is there two stages of the heater and one is out I have 124 volts to each lug to the heater any advice would be great thanks
I have a cal spa the heater light is on but not heating up just staying at 78 degrees I have a meter but not sure which wires to check on my whisper power unit. There is also a long round fuse that is a bg3031 could that be the problem?
I Have a Cal Spa ES748LE in finland. I bought it on July 2011. Bromine system works ONLY when JETS 1 are ON but it is not enough to keep water clean. Bromine system do not work because it is installed incorrectly (to wrong water pipe). Cal Spa and importer both know that but they are doing nothing...
I have a 1999 cal spa just got it and got it up and running tonight. The pump runs fine but the only time the heater light is on is when the pump is running is that normal?
I have a Cal Spa 5000 and it was manufactured in 2003. It will not heat up and the jets are running with the thermos stat set to 100 degrees . I have turned the power on and off but still have no heat. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
