 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lopes at idel 16.5 briggs
I have a 16.5 briggs ridinglawn mower when you start it the motor lopes at idle... I have cleaned the carb 3 times now... still no luck... it has the fuel shut off valve in the bottom of the bowl... could this be closing and opening causeing my problem... I have checked it and it getting 12 volts at the hot wire and the other I have re grounded it... have change fuel line and filter... no luck... ti stops lopeing when you engage the blades... but soon as you take them back out it lopes... make it for a loping ride... help??
|
||||
Check out some similar questions!
I have 2000 toyota corolla curb idel fail Limited 150 reading 359 fail Co% 0.70 limited reading 1.10 fail why?
My 91 civic idel races and will not drop down without me manually pushing on the linkage.. I am not getting full travel out of my linkage... how do I get it to recover for lack of a better word? There appears to be a broken vacuum line under the injector body(if that makes any sense) next to the...
I was told that the "main Relay was bad, because the car would run for a while, then die. Wait sometimes overnight before it would start. Ok I did this, the car ran fine in the driveway warming up, so I drove it to the store, I did NOT make it there. It died and had to tow it home again... The next...
I have a 14hp briggs on a 2004 toro 1438z ztr mower. It has a nikki carb which I rebuilt 2 days ago. When I start it it runs OK at high idle though it misses some, but when I idle it all the way down it lopes badly and occasioaly backfires. Is this a fuel solenoid problem or what??
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
