Check out some similar questions!
Gear box reduction & gear
[ 0 Answers ]
My plant consists of drum of about 7feet dia and 23 feet length the drum when full loaded bears weight of 10 tons including the weight of drum. This drum is to be rotated at 0.4 rpm can u help me in getting the gearbox turn ratio & gear type & no of teeth to be used for it
Gear box reduction & gear
[ 0 Answers ]
My plant consists of drum of about 7feet dia and 23 feet length the drum when full loaded bears weight of 10 tons including the weight of drum. This drum is to be rotated at 0.4 rpm can u help me in getting the gearbox turn ratio & gear type & no of teeth to be used for it
Chrysler 300m 2001 model. I only have reverse and 2nd gear. Anyone know why?
[ 0 Answers ]
Car is in limp mode only gets 2nd gear and reverse, Speed O does not work. Got it scanned at Autozone and got a p1698 code. Which indicates Failed ECM, Open CCD Busline, or failed PCM. What does the ECM, CCD, PCM stand for. I have changed both input and output speed sensors. What else should I be...
Car gear not switching to 2nd gear
[ 0 Answers ]
My toyota 98 camry can't switch form 1st to 2nd gear, Goes reverse.. Dashboard is off at the same time, no speed no rpm, no temp. please help
Repalace ring gear gear on brigg and sratton 14.5 engine
[ 1 Answers ]
How do you removed the ring gear from the fly wheel and put on new one on the teeth is worn out and the starter will not turn the motor View more questions Search
Add your answer here.
|