 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xr80 blinks 4 times the n works fine heats up then shuts off
I have a trane xr80 about 7 yrs old. A code 4 comes up. When I turn on furnace it runs for about 5 minutes and blows heat. Then it will shut off and blink a code 4. I did recently get the vents blown out and cleaned filter. When the air blows it smells burnt in y vents as well. What do you think it could be.
Thanks B |
||||
Check out some similar questions!
Nordyne furnace shuts down then blinks 2 times
[ 0 Answers ]
I have a nordyne mmha- 090 it calls for heat, clicks a few times and then shuts down. It blinks 2 times. I have replaced the igniter but it still does not work, any ideas?
Trane xr80 9 blinks
[ 0 Answers ]
Trane XR80 blows cold air. Inducer motor comes on, glow bar glows for few seconds than goes out and inducer motor shuts off. Immidiatly after the main blower comes on and blows cold air. Will blow until main switch is turned off. Error code is 9 blinks. Replaced the glow bar and same...
Trane furnace xr80 troubleshooting red blinks
[ 4 Answers ]
Tranexr80 lights flash 5 times...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
