Ask Experts Questions for FREE Help !
Ask
    sandyslim1's Avatar
    sandyslim1 Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 2, 2012, 04:26 PM
    How much is a timer for a kenmore eilite washer?
    Washer is spinning for about 3 secs and don't clear water out of the tube. Runs about minute and has a F code
    sandyslim1's Avatar
    sandyslim1 Posts: 2, Reputation: 1
    New Member
     
    #2

    Mar 2, 2012, 04:27 PM
    What is a F code ? Sears top laod waher?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #3

    Mar 3, 2012, 04:46 AM
    Hi sandyslim1 and welcome, f codes can indicate the machine is not draining, I would check for blockage or a kink in the drain hose and then pull the plug at the pump to look for blockage, socks are bad here. You can access the pump from the kick panel in the front. Good luck

    Oh to answer your question on cost of timer, that's usually around $200.00, so you want to try and avoid going that route.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove kenmore washer timer part no: 3356457 from washer model 110.92283100? [ 2 Answers ]

My kenmore washer model 110.92283100 does not advance to next function, it still do the work if I use my hand to turn to the next function. So I thought that my washer timer part number 3356457 is at fault. I have no instruction to remove the timer from its control panel and I do not want to break...

Kenmore elite washer burnt contacts in timer [ 1 Answers ]

model 110.15962401- I think built by Whirlpool - less than 5 years old. 3-speed motor. First sign of trouble was it tripped the 20A circuit breaker on slow / intermittent setting. Now it's agitating without filling, not spinning in perm press cycle, randomly changing agitation speeds. I removed the...

Kenmore elite washer burnt contacts in timer [ 0 Answers ]

model 110.15962401- I think built by Whirlpool - less than 5 years old. 3-speed motor. First sign of trouble was it tripped the 20A circuit breaker on slow / intermittent setting. Now it's agitating without filling, not spinning in perm press cycle, randomly changing agitation speeds. I removed...

Can I adjust my Kenmore washer timer dial? [ 2 Answers ]

My 2007 kenmore washer (model 27741600) is having an issue with the timer dial. The washer fills, agitates, rinses, and spins, but none of these happen according to the dial. If you start a load at the beginning of a cycle, it will "end" filled with soapy water (as if it is in soak mode). You...


View more questions Search