Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pull cord won't pull on Murray 2.0 mower
[ 7 Answers ]
I have a Murray/Briggs 6.0 engine mower and the pull cord is sticking. It will stop after pulling about 4 inches. Then if I jiggle the pull cord it will extend another 4 inches. I can see a plastic piece that seems to be stopping it at every four inches. What is causing this and what is the repair...
How to fix a Jammed Recoil on a pull start
[ 1 Answers ]
I just tried to start my machine and I puled the cord out and it didn't recoil back in.. I wored on it to try to get it fixed but it just won't recoil.. Any ideas or suggestion would be great! Thank you
Pull switch
[ 2 Answers ]
Anyone know how to replace the cord in a pull switch? Thanks
Pull Rope will not pull
[ 1 Answers ]
I have a B&S Troy-bilt that I bought in April. I have used 3 times. On the 4th time the mower was working. It suddenly died. I assumed it was low on gas. I added gas and the pull rope will not pull. I am not sure how to fix any ideas.
Briggs&Stratton Billy Goat Pull Start broken
[ 3 Answers ]
Hey, my billy goat pull start is stuffed. When I pull it it goes floppy and won't wind back onto the wheel. Its happened before but when I've taken the top plate off it wound back on and I hadn't had trouble with it, until now. Is there anything I can do ?:confused: View more questions Search
|