Ask Experts Questions for FREE Help !
Ask
    ajp2022's Avatar
    ajp2022 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2007, 07:47 PM
    Chair rail moulding height
    How high should chair rail moulding be mounted in the dining room ?

    Thanks
    bartman's Avatar
    bartman Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Mar 30, 2007, 02:11 PM
    Originally Invented To Protect Chairs From Marking Walls---most Chairs Are 32-36 Inches High ----measure Your Chairs And Install To Suit
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #3

    Mar 31, 2007, 10:39 AM
    I have also seen some pioneer homes where the chairs were actually hung from a 'chair rail' which was about 6 ft off the floor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How high should a chair rail be? [ 3 Answers ]

I am thinking of adding a chair rail in my dining room, but I don't know how high it should be. Is there a standard height? Also, how do you deal with doors and larger openings without doors (like between the kitchen and dining room)? How about windows? We have standard size double hungs that...

Installing a Chair Rail with rounded corners? [ 2 Answers ]

I have a new house and in case you don't know most new homes now have rounded corners. And I'm installing a chair rail in one room that has them. The chair rail I bought doesn't have the pre-made rounded corners that can be bought at Home Depot or Lowe's. So my question is how do I have a chair...

Installing faux paneling and chair rail up a staircase [ 4 Answers ]

I have installed chair rail and faux paneling in my foyer. So far it looks great, but now I want to continue up the stairs. I have determined that the first outside miters for the top left corner will each be 22.5* cuts. Subsequently, the opposing corner will also be the same degree cuts. But what...

Chair Rail up Stairs [ 2 Answers ]

I would like to put chair rail up a stairway, but the problem is that it would interfere with The existing handrail. Which way is better - to put it above the handrail, below it, or even with it? I'm using half-round, so even with the handrail would make it tough to use the Hand rail. Also,...

Chair rail trim [ 1 Answers ]

How do I end the trim on an open corner? Straight cut or miter cut?

View more questions Search