Ask Experts Questions for FREE Help !
Ask
    Cold123's Avatar
    Cold123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2012, 07:02 PM
    Carrier 58sta135-16?
    Carrier model 58sta135 will not ignite even after replacing igniter, still flashing code1 long 3 short any ideas?
    SeattlePioneer's Avatar
    SeattlePioneer Posts: 97, Reputation: 9
    Junior Member
    		  
    #2

    Jan 24, 2012, 04:40 AM
    Check again.

    The Carrier 3-1 code would be three short and one long. Is that what you have?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier 58sta135 furnace not working [ 0 Answers ]

I have carrier 58sta135 furnace it start and after 10 min it stop , I and need to close and open the main switch.to start

Carrier furnace 58sta135 will not light [ 1 Answers ]

Carrier model 58sta135 will not ignite even after replacing igniter, still flashing code34 any ideas?

Carrier Comfort14 or Carrier Comfort 15? [ 3 Answers ]

Which is a better system, Carrier Comfort 14, Puron, 3.5 ton, single stage, 16 SEER, air conditioning and heating system, condenser model 24ACB442A003 to new refrigerant lines using Carrier evaporator coil model CNPVP6024ATA, ON TOP OF A CARRIER iNFINITY VARIABLE SPEED GAS FURNACE MODEL...

Carrier [ 4 Answers ]

I have had same problem with Carrier furnace - don't know model # at this point. After about 20 hours of working, furnace won't work unless blower switch is shut off/on. Or, open door/close it. I was informed by similar help site to replace the surfface heat ignitor, which can break as often as a...

View more questions Search