Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Making a twist lock power cord
[ 5 Answers ]
I have a 5,000w Coleman Powermate generator. I just installed a Gould transfer switch. Now I just need to connect them together. The Coleman requires an L6-20P 3 prong and the Gould requires an L14-20R 4 slots. I cannot find any such cable. I can buy a Levitron L6-20 plug and a L14-20...
Emergen 10-12k 50 amp switch to L14-30 twist lock
[ 6 Answers ]
Hi there I have a Briggs generator with the standard 30 amp twist lock output and have purchased a Emergen 10-12k switch that has a 50 Amp 3 prong twist input. Question how to I make a cable for this to connect between the two units. I know you use a 10/4 cable if it were a 30 amp but I don't...
Twist plug on bath not working
[ 3 Answers ]
The twist plug on my bath is not working I have taken it off the front of bath and removed bath panel to get to the bit where the twist handle sits in but I can not see what to do now.
Male pigtale to Hubbell Twist lock receptacle
[ 7 Answers ]
I want to assemble a pigtale -- one end will be a standard 125V female that will run a temporary lighting system and the other end a Hubble twist lock male that will connect to a HBL7310B (Hubbell 125V 20A ungrounded twist lock receptacle). The Hubbell receptacle is hooked to a generator which is...
What is a twist lock receptacle and purpose of use?
[ 4 Answers ]
What is a twist lock receptacle and purpose of use? View more questions Search
|