Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman Riding Mower 23 Kohler hp 24 inch deck
[ 11 Answers ]
I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...
3 Inch Cleanout Threads Rusted
[ 1 Answers ]
I can not get a new 3 inch cap to screw into my cast iron clean out opening. I cleaned tit with a dremmel wire brush and WD40. Still a new plug will not start, the old plug will start and go in a ways. Is there a way of repairing these threads or are thiere different thread tyoes? The pipe was...
27 inch zenith TV that won't turn on
[ 2 Answers ]
I have a 27 inch Zenith TV that will not turn on.I can hitbthe power button and it clicks like it wants to come on but it won't.Can someone tell me what's wrong?Thanks Dei2007
1 1/4 inch fittings won't fit 1 1/4 pipe
[ 1 Answers ]
The pvc nipple on the intake of my shallow well pump was leaking. I cut the 1 1/4 inch pipe and was going to couple in a new nipple. The coupling would not fit the old pipe. It is white 1 1/4 " and so is my replacement pipe. I showed it to three different hardware stores and none of them could...
2 inch adapter for lav sink?
[ 1 Answers ]
I'm putting in a pedestal sink but the old lav p-trap goes from the standard 1 1/2 inch or 1 1/4 inch (tailpiece connection) to a 2 inch female pipe thread connection. A piece of galvanized 2 inch pipe (male threads) then connects to the drain in the wall. All of the nice chrome drains these... View more questions Search
|