 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York Stellar P3CCD12n06101A
I have a York Stellar P3CCD12N06101A it lites and runs fine but I noticed that the fan limit will reach it limit then flames go out. When it cools down it lites again. Starts this cycle all over again.It will never let the t-stat reach the temp it is set at. I think maybe the blower isn't blowing fast enough to keep heat chanber at the right temp. I replaced the blower back in the summer and its been runnig fine so far this winter. Until last night.
|
||||
Check out some similar questions!
What are the British thermal units for this model?
I have a york stellar furnace 76,000 BTU no a/c... gas... model # p3ucd12n0610a. I'm trying to replace the control module because it got wet... I replaced the capacitor and 2 relays but can't read the module config. And it got thrown away. Do you have a picture of the module or the original...
I have a York Stellar furnace, age unknown, maybe 10-15 years. Once lit the furnace stays on until the cycle is complete, but won't re-light when the temp drops again. Flipping the switch off and then on makes it try to light again and sometimes it will, sometimes not. Seems like its only...
I've got a 20 yr old york stellar gas furnace the ciculation fan nolonger kicks on is there a thermastat for that I can check of some where I can get I diagram for wireing what my option?
York Stellar gas heater not igniting. Fan will blow cool air, but no heat. Tried replacing batteries in thermostat as well to see if that was the problem.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
