Check out some similar questions!
How to change a ceiling fan that is wired separately with a single light fixture?
[ 2 Answers ]
I have a ceiling fan with a light fixture that is connected to 3 separate wall switches. 1 is for the fan to be turned on and off, and then the other 2 are at entry doorways for the light to be turned on and off, I am looking to replace the ceiling fan with a regular light fixture, how do I...
Hamton Bay outdoor light fixture... how to replace a dead light bulb.
[ 0 Answers ]
I have to see if one of the glass panels slides up or down or left and right. It does not appear that the top or bottom is removable. Don't have instruction guide... don't know the model number
Can I wire a W/R transmitter to my wired light switch to use a remote as well?
[ 13 Answers ]
I was using a wireless transmitter on my bedroom lights with a hampton bay wireless remote but a friend of mine hooked it up. There was no fan. I have a new house now and I would like to do the same. I have 6 recessed lights hooked up to a normal light switch in the wall. How can I make this work?...
Replace chain pull from light on light/fan fixture
[ 2 Answers ]
I pulled the chain out of its housing that controls only the light on my kitchen light/fan fixture. I went to a hardware store and the clerk sold me a little fixture with three wires, pink, white and black. When I took my fixture apart, I found my fixture has a two wire little round thing where...
Wired ceiling light causes short
[ 3 Answers ]
I recently bought a ceiling light from Home Depot and once I made all the connections, inserted light bulbs and then flipped the switch it caused the circuit breaker to trip. I don't know if I have somehow wired improperly but I did as the instructions told me (two whites from light to white from... View more questions Search
Add your answer here.
|