Ask Experts Questions for FREE Help !
Ask
    tandrew6's Avatar
    tandrew6 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2011, 08:07 AM
    Carrier 58SXA080 furnace doesn't turn on automatically.
    We come home after work and sometimes our house is 60 degrees. We turn the Honeywell dial thermostat from "Heat" to "Off" and back to "Heat" and the Carrier 58SXA080 furnace starts fine and warms the house to 70 degrees. This was happening once a month, but now it is happening almost daily. I replaced the thermostat with the same model except for the back plate thinking the mecury switch was bad. But this did not help... Thanks. -Tom

Check out some similar questions!

Furnace fan will not automatically turn on [ 0 Answers ]

I have a Lennox G23 series and the fan will not automatically click on when the furnace starts. When I turn the fan to on the system is working fine.Thank you

Carrier Furnace will not Start automatically [ 1 Answers ]

We have a Carrier furnace that is 5 years old, the thermostat is set for 23 degrees, and the temperature is sitting at 19 degrees. The furnace quite often will not kick in, if I open the door of the furnace and manually hold the switch it sometimes kicks in with the first try; however I normally...

Furnace Does Not Turn on Automatically [ 33 Answers ]

Sometimes when I have the furnace set on automatic it will not turn on when the temperature goes below the set point. All I have to do in order for it to work again is turn the furnace off then back on (I do this at the thermostat) and it will work fine for a day or two, then the same thing happens...

Carrier Weathermaker SX, does not turn on automatically, shuts off [ 19 Answers ]

Hello, We have a Weathermaker SX. Yesterday morning I woke up and it was only 61 degrees. When I shut the heater off and turn it back on, it heats for about 5 minutes and then stops. The same works on the thermostat, when I turn the heat off and on again. Sometimes it comes on one more time...

Changed Thermostat will not automatically turn Furnace on [ 1 Answers ]

We changed our old honeywell thermostat (with mercury) to an updated honeywell thermostat (with no mercury) CT87K. After we changed the thermostat the furnace will not automatically kick on and it actually shut off so we had to hit the reset button. The furnace at times now will turn of if we put...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.