Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Correct voltage in light bulb socket, but bulb(s) won't light
[ 1 Answers ]
Regarding a 4-light kit on a residential ceiling fan (Hampton Bay). 20 A circuit, nothing else on in circuit (house is vacant). No wall switch; all switching done at fan/light kit (separate pull chains). Fan turns fine. 122 VAC as measured w/ a Fluke meter within light bulb socket. Have...
Bulb Socket Replacement
[ 1 Answers ]
How do I remove the bulb socket from a Litex Ceiling Fan/Light to replace it with a new bulb socket?
When using a 3 way bulb in a standard light socket, which wattage lights up?
[ 2 Answers ]
When using a 3 way bulb in a standard light socket, which wattage lights up? Lets say you screw in a 50-100-150watt 3 way bulb in a standard on/off lamp, which wattage will turn on when you turn on the lamp. What happens if you put a 3 way bulb into a non-switched lamp, planning to use a foot...
Using a twin bulb adapter in a 3-way lamp socket
[ 3 Answers ]
In order to increase the light output from a lamp, I've purchased a twin socket adapter (shaped like a Y) that screws into the existing socket. The lamp has a 3-way socket that works fine with a 1-way compact screw-in fluorescent bulb. However, when I screw in the adapter with two compact...
OBD2 auto scanner socket Location
[ 1 Answers ]
On a 2003 Toyota Echo. I wonder where the OBd2 socket is. For scanning Codes. I have looked under the dashboard on the drivers side. But I don't see The socket for the scanner to plug into? View more questions Search
|