Ask Experts Questions for FREE Help !
Ask
    Oneill474's Avatar
    Oneill474 Posts: 427, Reputation: 2
    Full Member
    		  
    #1

    Dec 19, 2011, 10:17 AM
    Auto bulb socket
    Turn signal socket does not hold the bulb properly.It is loose in the socket.
    It works for a while, than becomes loose. I guess I should detach the socket and
    Buy another. 2003 Toyota Echo. Or wedge something to keep the bulb from wiggling.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Dec 19, 2011, 05:06 PM
    Didn't we cover this before?
    I guess you answered your own question.
    Happy holidays.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Correct voltage in light bulb socket, but bulb(s) won't light [ 1 Answers ]

Regarding a 4-light kit on a residential ceiling fan (Hampton Bay). 20 A circuit, nothing else on in circuit (house is vacant). No wall switch; all switching done at fan/light kit (separate pull chains). Fan turns fine. 122 VAC as measured w/ a Fluke meter within light bulb socket. Have...

Bulb Socket Replacement [ 1 Answers ]

How do I remove the bulb socket from a Litex Ceiling Fan/Light to replace it with a new bulb socket?

When using a 3 way bulb in a standard light socket, which wattage lights up? [ 2 Answers ]

When using a 3 way bulb in a standard light socket, which wattage lights up? Lets say you screw in a 50-100-150watt 3 way bulb in a standard on/off lamp, which wattage will turn on when you turn on the lamp. What happens if you put a 3 way bulb into a non-switched lamp, planning to use a foot...

Using a twin bulb adapter in a 3-way lamp socket [ 3 Answers ]

In order to increase the light output from a lamp, I've purchased a twin socket adapter (shaped like a Y) that screws into the existing socket. The lamp has a 3-way socket that works fine with a 1-way compact screw-in fluorescent bulb. However, when I screw in the adapter with two compact...

OBD2 auto scanner socket Location [ 1 Answers ]

On a 2003 Toyota Echo. I wonder where the OBd2 socket is. For scanning Codes. I have looked under the dashboard on the drivers side. But I don't see The socket for the scanner to plug into?

View more questions Search