No power at Bryant furnace thermostat?

jaxbrian Posts: 1, Reputation: 1

New Member

Dec 18, 2011, 06:17 PM

No power at Bryant furnace thermostat?

I have a 2 year old Bryant 90i furnace. I looked at the thermostat today and there was no lights. I checked the breaker and then checked for 24 volts at the thermostat. There is no power at the thermostat. Is there any fuses or other breakers I should check?

Check out some similar questions!

Bryant gas furnace thermostat wiring? [ 2 Answers ]

I have an older Bryant Funance 80 system with A/C. The other day, the furnace would not ignite electronically. It was deemed by the serviceman to install a new board. So the new board was installed and the ignitor works but the furnace is short cycling.. meaning the burner comes on for just a...

Bryant thermostat hc displays on power up? [ 1 Answers ]

I just installed a Bryant non-programmable thermostat, upon power up, the display keeps blinking "HC", I've tried holding certain buttons together as instructed and nothing is working. What could be the problem?

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Hunter thermostat compatibility with Bryant Furnace [ 6 Answers ]

Hello. I have had a Hunter Auto Saver 550 7-day programmable thermostat for several years and recently had my furnace replaced with a Bryant 345MAV. Since the furnace replacement, my heating bills are very high - even compared to the stay-at-home neighbor with the new baby! At the last HVAC...

Bryant furnace to a Hunter programmable thermostat [ 1 Answers ]

I am trying to hook up a programmable hunter thermostat model # 44360 to a bryant system and heat pump, I have 6 wires coming out of the wall one green, red, orange, blue, yellow and white, the hunter thermostatha g, rc, rh, y/o, w/b, and y1 can any body tell me what goes where? Jmt

View more questions Search

Check out some similar questions!

Add your answer here.