I have a colman evcon ah12x10ba thermastat set on 72 and I am not getting any heat any

battleship72 Posts: 1, Reputation: 1

New Member

Dec 11, 2011, 09:32 AM

i have a colman evcon ah12x10ba thermastat set on 72 and I am not getting any heat any

I have a colman evcon ah12x10ba thermastat set on 72 and I am not getting any heat do I have a heat strip out and if so where is it I have a unit outside and one in closet

Check out some similar questions!

No heat from Colman 7900b series heater(Standing Pilot) [ 0 Answers ]

When I Turn heater on the fan works but there is no heat at all. I checked my breakers and tried to reset what I thought was the ignitor but it wasn't popped. What can I do?

Thermastat set to 76 but only heating 73-74. Below 0 degree outside [ 1 Answers ]

It is -10 degree outside. My thermostat is set to 76 degrees. It is only reading 73-74 degrees. The heat synbol is on thermostat to show heat is on, but radiator feels cool. Is this normal?

I am looking for a fan assembly for a moble home heter colman evcon spectrum model dg [ 0 Answers ]

Hi I am trying to locate a fan assembly for a colman dgato56bdd, this is not the main blower fan it's a small assembly on the top that I suspect is to make sure propane is evacuated prior to the electric pilot enguaging , this series is called spectrum A. it's a 36 thousand BTU and called an EB....

Colman Evcon control board [ 1 Answers ]

Please help on Coleman Evcon control board wiring diagram ,for new control board. It looks slightly different than original.

Colman Evcon furnace burner shutting off [ 2 Answers ]

Hi... my model DGU08012UB is having an issue. The induction motor comes on,ignitor lights burner and the burner runs for 3-5 seconds and shuts down. The induction motor continues to run. The burner will not come on again. If I power it down,it repeats the cycle. I do not see any diagnostic error...

View more questions Search

Check out some similar questions!

Add your answer here.