 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace does not blow heat sometimes
Once the furnace gets the signal from the thermostat, I hear the Furnace start up... but the blower does not kick in. It does work most of the time, however occasionally the furnace just runs and runs and does not blow heat. Only way I can fix this, is by turning off the switch on the furnace and then back on again. Then it will start up and blow heat again after about 30 seconds. Any ideas?
|
||||
Check out some similar questions!
I have a new Rheem heat pump. The cooling works fine but won't blow hot air in HEAT setting. I have reset the breakers for heat pump and air handler, changed filters and pulled batteries and reset the Braeburn 3000 thermostat. Still blows cold... Any other suggestions?
We have replaced the filters and the limit control. Didn't help.
I have a Lennox elite series furnace. The vents are just blow out cold air, not heat. The theromstat is now working strange. I set the digital theromstat at 75 deg. And then place the thermostat on hold. The temp. emediately goes to 65 deg. I went into the attic and looked at the system. I read...
I have been in my home now for 6mths and my unit is brand new. During the day unit heats my home but at night when the temp has dropped it blows cool air and does not heat the home. What is wrong with it? My air conditioner works fine... it's just the heat.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
