 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fuel pressure when ignition is on but no pressure when you try to start
I have a 1995 Ford f250 with a 5.8l engine. When you turn the ignition switch on, there is pressure at the fuel rail, as soon as you turn the ignition switch to start, the pressure goes to zero. You can turn the switch off and immediately turn to on and it will pressure up. It has two tanks and the result is the same with either tank. Have changed the coil and the fuel module. Any ideas?
|
||||
|
||||
|
. Check all under hood and under dash fuses with a test light or multimeter.
. Check for spark. . Check/replace the ignition switch. If the truck doesn't start, for even a moment, when the fuel rail is fully pressurized, the problem may be a bad Ignition Control Module (ICM). 90%+ of all crank but won't start situations are electrical related, not fuel. My bet, from afar, is that the ICM is bad. The spark is probably poor, non-existant, or not when the PCM needs it to fire. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Was intermittent at first, would die when I was coming to a stop and would take a second to start back up and really pumping the gas pedal after it fired up. It would not start back up one time, got it towed to the shop and the mechanic quoted me $770 for a new fuel pump :/ so I told him I would...
1989 Pontiac Formula 350 that won't start. New plugs, fuel pump, ECM, injectors are good, has spark. Out of options!
My 1997 Prizm ran well until 1 1/2 months ago. One day during several weeks of wet weather, I was stopped at an intersection and the car stalled. It took several minutes of retrying and it finally started. I drove it home and put a can of dry gas into the fuel tank. It would no restart. A...
My question is what should fuel pressure be at rear of head I have a 98 e350 with a 7.3 and a no start condition, I have changed the relevant sensors and the only thing that I have left is poss. Fuel pressure so I need to know what the fuel pressure should be
I have a 1996 gmc sonoma (zr2 package) with a 4.3 motor (engine code W). I sometimes have problems getting it started, when the motor is warm it starts without any problem, but when it is cold I have a hard time getting it started, if I put gas or starting fluid down the throttle body it starts...
View more questions Search
|
