Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to connect red and white wires to a thermostat with G, why, W, RH and RC wires?
[ 0 Answers ]
I'm trying to change a Honeywell RTH 6400, to a LUX TX 500
How to connect Programmable Thermostat without colored wires?
[ 0 Answers ]
The Honeywell I am attempting to install only has 2 Black wires. My old one has 5 wires, two that connect at the top, two that connect at the bottom and a copper one that connects lower at the bottom. I'm not sure where the black wires on the new thermostat needs to be connect, or what I should do...
Unmarked Thermostat Wires
[ 1 Answers ]
I have a Weil Mclane Steam Boiler and Radiator System. I am replacing an OLD Honeywell "Electric Clock Thermostat". After removing the innards - I found the old unit was wired to 4 unmarked, uncoded wires. It appears that the two wires on one side of the unit served to run AC power from a...
How do I connect wires from Janitrol to the Honeywell Thermostat
[ 1 Answers ]
How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected
How to connect wires to a RTH6300B honeywell thermostat
[ 2 Answers ]
I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated View more questions Search
|