 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing Honeywell RTH6350 D1000 wiring help
I am changing thermostats from a Honeywell T8411R 1002 to a Honeywell RTH6350 D1000
My problem after following instructions is where to put the "C" wire? I am using a heat pump York Model F RP030H06A and the blower outside is E1RC024S06C Here is a picture of existing wiring: 
|
||||
Check out some similar questions!
I installed a new honeywell rth221 t-stat. All the wires from the old t-stat were then placed on the new t-stat (yellow to yellow, white to white, red to red, green to green except for a black one. I just pushed it back to the wall. I turned the unit on cool and then it seems like it is getting...
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
Hi I bought a new thermostat a Honeywell rth7400 for heatpump & aux (oil as back up) The old thermostat was a totaline with a separate toggle installed underneath it to switch back and forth from auxiliary to heat pump I have 8 wires coming out of the wall I have tagged them as followed:...
Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
