 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
6.0 diesel problems?
My 6.0 /05 turns over well but starts some times, at times it needs the help of starting fluid
Egr,cam sensor,Injecter controlle module,Has been changed. Computer shows all oil pressure to be in specs. Has any body expirence same problem looking for help. |
||||
Check out some similar questions!
I have a 2004 6.0 diesel and there is a plug loc. 4-5'' above where transmission mounts. This bolt has a o-ring and it keeps blowing the o-ring. It never had done it until 4 months ago and it has recently happen. What is that bolt for? And is there a special o-ring I need to buy?
I have a 1992 f-350 runs very good but recently its having problems starting. Its starts right away with starting fluid I took off the front two glow plugs and there are torched. Is there a reason why it would burn the glow plugs like that? I had replaced about five glow plugs in January and it...
My check engine light on my 6.0 says I have a fuel pressure control circuit problem. Could this be a sensor? I have been told it is probably the sensor behind the turbo is bad. Can you help?
Why is fuel coming out of the bottom of the fuel/water drain valve tube
How in th eworld do people get 19 to 21 mpg out of these engines? On a good day I can't get 13. Truck vibrate and jerks like crazy when it shifts into overdrive any help would be greatly. Ford techs have been no help at all they say its suppose to run like this. I can't believe a 25000 truck is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
