 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Depends on the application.
Wet filters tend to be used when numerous machines are employed, as wet lint has a significantly lower volume than dry lint, so disposal would be easier. In a domestic setting normally the filter is of the dry type and emptied on every machine filling. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi. I have a Samsung Triflow SW65ASP2 Top loader which is nearly 5 years old. I have just noticed that the 2 lint filters are shreded from use and have no idea where (or even if I can) get replacements. I bought the Machine at Myer (and have never seen any there). I have a toddler and a baby so...
My Kenmore front load dryer light is on for the first time after 4 years of use. My question: is there anything different we need to do other than the cleaning of the screen after each load is dried (religiously. We also periodically go into the area that the screen fits into and clean it out with...
Hi, I am new to this forum and I need a bit of help. We have a Kenmore series 70 washer model 110-26722693. It works fine but it is leaving lint all over my clothes. I read elsewhere on this forum that it is a self cleaning filter located under the inner tub. I have called an appliance...
Lint build up on clothes and washer drum on new Whirlpool top loader.Whirpool and many others fail to use filters in the wash cycle causing poor wash and plugged drain to waste lines .does anyyone have a solution to the problem ,other than to resurect the old machine that has a lint filter.
Where do I find and clean the lint filter? If it is an automatic cleaning filter, and it is not doing it's job, how can I clean it out?
View more questions Search
|
