Not your question?
Ask your question
View similar questions
Check out some similar questions!
Testing inducer motor
[ 0 Answers ]
How to test an inducer motor with a multimeter
Inducer motor cycles on and off
[ 1 Answers ]
I have an older (12yrs) Rheem heat/cool unit. The inducer motor cycles on and off when the temp is around 75 degrees on a cooling setting. The cooling temp is set to 78 degrees. I replaced the thermostat thinking this would remedy the problem. The problem stills presists. The furnace seems to...
How much for an inducer motor?
[ 1 Answers ]
How much should it cost to replace a goodman inducer motor that is humming?
What is the inducer motor
[ 3 Answers ]
I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...
Inducer Motor Problems
[ 6 Answers ]
I have a Goodman Gas Furnace installed in 1997 and have been experiencing the following problems: The usual run for the furnace has been inducer motor on, ignition (with flames), and then the blower motor comes on. I have been having the inducer motor come on, run for about three minutes,... View more questions Search
|