Ask Experts Questions for FREE Help !
Ask
    DoItRight's Avatar
    DoItRight Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2007, 06:53 PM
    Why the thermostat unable to start the furance
    We have zoned baseboard heat in the house. The thermostat on the bedroom level can not start the furance. In order to get heat for that floor, I first set the temperature at a higher level, then turn on the thermostat in the basement to start the furance. It works like the thermostat in the basement is controlling the whole house. The thermostat is a round dial-face type. Is it something we can fix on ourown? Thank you for your advise in advance.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Feb 3, 2007, 07:04 AM
    End switch on zone valve to bedroom is probably bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furance works once, doesn't restart [ 5 Answers ]

A problem recently developed with my furnace. I increase the thermostat and I hear the furnace "click" on. I see the orange ignition light turn on and the flame begins to flow within 10 seconds or so and then the orange light fades away and the hot air flows - which I presume is normal. The...

Tempstar smartcomfort two stage gas furance [ 2 Answers ]

The power went off in my area and the furnace has not worked since. I looked at the circutbreakers none were tripped. I turned the one switch I see on the furnace and still nothing. It will be some time before I can get service since there is a driving ban in my city right now can anyone give...

Humidifier and Furance Hookup [ 1 Answers ]

I have a pair of Carrier 100 BTU furnaces controlled by a Honeywell programmable thermostat. There is a Aprilaire humidifier with a completely separate control attached to the furnace. I purchased a fan relay Steveco 90-293Q to wire the humidifer inline with the furnace thermostat control. I would...

Unable to start furnace [ 2 Answers ]

Hello, I have a two-zone forced air system using an oil furnace. A week or so ago, I lost the ability to start the furnace from the downstairs thermostat, which was a standard round Honeywell electro-mechanical. I could start and stop the fan by setting the control to "On" rather than "Auto",...

Unable to start up the computer [ 2 Answers ]

Dear All, I have a problem with my computer. When ever I try to start the comuter the CPU make some sound and this will keep on going and the computer will not stat up. Why? I changed the boot preference to Hard disc thinking that my floppy drive is damaged. How can I solve it Thanks Lijo

View more questions Search