Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire a single pole switch to a single grounded receptacle?
[ 3 Answers ]
I have 2 15amp single pole light switches that have just 2 brass screws and a green grounding screw on them and I have 4 15amp 125v grounded single receptacles that I want to wire up for my light switches to operate 4 sets of fluorescent lamps which already have plugs on them and one that has a...
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights
[ 1 Answers ]
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please
How to Wire a Split Receptacle Controlled by a Switch
[ 2 Answers ]
How to Wire a Split Receptacle Controlled by a Switch
Switch controlled outlet to constant power
[ 1 Answers ]
I have an electrical outlet in living room which has top half controlled by switch and bottom half has constant power. The switch controls 4 other outlets in the room in the same fashion. I would like to make this outlet have constant power to the top and bottom. Is this an easy fix?
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|