Ask Experts Questions for FREE Help !
Ask
    rmfrechette's Avatar
    rmfrechette Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 26, 2011, 12:48 PM
    Accelerator pedal linkage on a troy built super bronco
    Where do the two ends of the return spring for the accelerator pedal attach on a troy built super bronco - disconnected the spring to address a belt issue and the spring went flying before I noted where it was attached - I have it attached at the moment so that the mower is useable but I have lost all speed - please
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    May 26, 2011, 01:52 PM
    Hi,
    You did not give much info, here is a picture I could come up with. The #54 spring attaches to the rod and the #17 cotter pin keeps located. The other end fits into of the #51 arm.
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt Super Bronco 13AX60TG766 [ 2 Answers ]

Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...

Troy-bilt Super Bronco will not start [ 0 Answers ]

I have a model 13AT609G766 Super Bronco with a 21.0hpv twin it will not start, I had it running and when I pushed the lever to start the mower blades it died now it won't start. Can anyone help me, it will start if I spray starting fluid on the air filter but it dies after it burns off the starting...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

Troy-built super bronco drive belt [ 0 Answers ]

How do you replace,or put the drive belt back on the mower? Or where can I get this information?

View more questions Search