Ask Experts Questions for FREE Help !
Ask
    mrsan's Avatar
    mrsan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 7, 2011, 06:54 PM
    How to change the blade on Jonh deere gas edger
    How to change the blade on Jonh deere gas edger. The blade keep moving when I try to remove the nut ,also in which direction I should turn the nut ?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    May 8, 2011, 01:15 PM

    Put the blade against the ground.and try .
    Should come off to the left.
    Luck
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 8, 2011, 01:57 PM

    DG is correct. You can also clamp the blades with a metal "C" clamp and turn lefty loosey, counterclockwide. There are afew blades on machine that attach with reverse thread so check to see the blade rotation direction, loosening will be the opposite of rotation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Jonh Deere LT160 Problem? [ 2 Answers ]

I have a John Deere LT160 with the Kohler CV460S 16.5hp engine. It was running fine and then while cutting the lawn it started to hiccup and backfire and then it lost some of it's power. It ran a short time at maybe half power before quitting altogether. Here is what I did: 1. Compression check-...

How to put on a belt for gas edger [ 1 Answers ]

My belt broke for my 3.5 horse edger and I need to know how to put the replacement on

How do I change the gas tank on a John Deere L110 [ 1 Answers ]

How do I change the gas tank on a John Deere L110

View more questions Search