Ask Experts Questions for FREE Help !
Ask
    GW164312's Avatar
    GW164312 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2011, 01:32 PM
    Lennox signature stat displays blue light?
    The display on the Lennox SignatureStat shows a blue unreadable screen. Is there a way to turn off the blue screen and is this an indication of a problem with the unit?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    May 1, 2011, 05:46 PM

    See if this helps. Powered by Google Docs
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

SLP98UHV Dave Lennox Signature Collection gas furnace [ 1 Answers ]

What is the difference between fan 'on' vs 'circulate'?

Lennox 51M33 stat to Hunter 44860 stat [ 4 Answers ]

Lennox Heat Pump with Electric heat backup Lennox 51M33 wiring O - orange R - red G - green Y1 - yellow W1 / E jumper - white L - light red (pink) C - black T (Outdoor temp sensor) - blue

Old lennox with standing pilot and cam stat cycling [ 8 Answers ]

Hi gents Old lennox model 9803-980-2 H.boy 68000 BTU with a honeywell fan limit cycling every 5minutes . The wires disconnected at the Stat and jumpered . Still the furnace acting same problem . The motor and blower wheel and pilot acting quite normal . Do you think the fan limit is faulty...

Replaced lennox t-90 t-stat w/ hunter just right -still not fixed [ 1 Answers ]

Original problem was my blower was kicking on for about 10 seconds without the furnace lighting up and sending heat with the blower then it would cut off about 10-20 minutes later the furnace and blower would run its normal heating. Changed the lennox for a hunter just right digital and had some...

View more questions Search