Not your question?
Ask your question
View similar questions
Check out some similar questions!
1991 Volvo 740 vacuum problem
[ 5 Answers ]
I have a 1991 Volvo 740 2.3 non-turbo that is missing a major vacuum line. It starts the intake manifold and then runs up towards the master cylinder on the firewall. From that point, it "T's" off, with the bottom part of the line going up under the firewall. What I am missing is the other part...
Dyson hoover nightmare
[ 2 Answers ]
Any ideas why my Dyson (upright) is not sucking up through the hose on the handle?:confused:
Dyson Dc07
[ 24 Answers ]
I have a Dyson DC07. It won't pick anything up although the motor is working okay. I have cleared all the obvious areas and have washed the filter. Although after clearing these areas, it will pick up with very weak suction for a few minutes using the attachment, it then stops and I end up...
89 dodge spirit vacuum line help
[ 1 Answers ]
I need either a diagram of the vacuum lines on the 2.2 dodge spirit motor or else someone who can clearly tell me where the vacuum lines run to and how many connecters are involved. The vacuum lines I am talking about are right after the vacuum line harness into the carbeurator and valve cover. View more questions Search
|