Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Nailing MDF
[ 1 Answers ]
I have a brad nailer, using 18g brads, and am nailing into mdf. I'm having a problem with the brads pitting the mdf. What psi should I be using?
Spaced Out
[ 7 Answers ]
Hello all… I’ve been browsing through this topic for a couple of days, and I could really use some feedback and an objective opinion regarding my situation. Jumping right to the chase, my boyfriend and I are currently taking some ”space” apart (at his insistence) as he wants time to sort out...
Paint Bidding - exterior pickets and rails
[ 2 Answers ]
I have found much info here related to the painting business. Clough, you have been most helpful already. However, my question is a bit more specific. I am attempting to accurately bid an exterior job, mostly pickets, hand rails, and posts - a portion of which is screened in. Any suggestions? ...
Nailing Molding
[ 7 Answers ]
Quick question: when nailing up molding (base and casing), *where* do you like to nail? Thinner edges, thicker edges? Closer to edge of molding? Closer to center of molding? FYI: I'm using MDF, to be painted. Thanks!
Limited space question.
[ 5 Answers ]
I have some obstacles that limit the amount of initial drop (plumbing in a concrete slab) allowed in the bathroom group and wondered if it is OK to discharge a water closet directly into a sanitary tee (inlet of the tee pointing upwards)? Can the closet flange be shortened (sawed off) to further... View more questions Search
|