Ask Experts Questions for FREE Help !
Ask
    brubaker's Avatar
    brubaker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 13, 2011, 08:11 PM
    What is the wiring hook up look like on a Balboa Instruments panel, system Cat 200
    I recently purchased a Catalina hottub with balboa instrument panel, System Cat 200. The problem is wiring was disconnect from where the power goes into the system. If I could see a picture or an explanation of which wire goes to which terminal that would be great.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 17, 2011, 10:38 AM

    Should be a diagram inside the cover.
    I was able to find your board, but not enough detail to show connections.
    Can you provide a close up photo or list the words on the bottom terminals, also I forget what the Tabs on the right side of the panel go too.
    I spoke with Balboa Instruments, they don't have info for the Catalina 200? Strange?
    And I haven't found Catalinas site for manuals?
    Photos will work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I hook up a 200 amp sub panel to my exsisting 200 amp panel [ 1 Answers ]

Sub panel load size from main panel 200 amp to 100sub 350 ft [ 1 Answers ]

Wire conduit size fromm a main 200 amp panel to a 100 amp sub panel 350 ft away

Adding another panel from a 200 amp service panel [ 3 Answers ]

Hi everyone, this is my first post. I have a 60 x 100 ft shop that has a 200 amp service fed in from the pole. Well I added a living space in the shop, which is about 720 sq ft. I plan on doing all the wiring myself and need a little advice on what kind of panel I should use? The living quarters...

200 A Main panel to 100 A sub panel [ 1 Answers ]

I'm planning to upgrade my existing 100 A 20 slot main panel to a 200 A 40/40 panel with a new 200 A service. Is it possible to install the 200 A panel next to the 100 A panel and feed the 100 A panel from the new 200 A panel. I was considering doing this to avoid having to redo and possibly...

200 AMP Service panel to 200Amp Sub Panel [ 1 Answers ]

I getting new 200Amp service to surface mount service panel. I want to run 2oo cable to bring it sub panel in my Garage which is approx 120Ft Run through ceiling. 2 Questions 1. Is there any ristriction on running a 200AMP inside house to garage ? 2. I got a dirt cheap subpanel that has...

View more questions Search