 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
This 650 watt wolf generator has worked perfectly for two years. Engine runs aok as normal but no 230 volt output on socket after running for one hour with load of two 100w and one 60 table lamps, just went dark, no noticeable change in engine note. Checked powerfactor condenser by swop from...
I have a 4500 watt portable generator .when I plug something into it it doesn't seem to give that appliance full power,such as lights will be somewhat dim and flicker , not boldly but a flicker nonetheless. Engine runs smooth, but notice the needle on the meter won't quite go up to 120v and it has...
QUOTE=tkrussell]The 100 volts is a bit low. Electrical device operate on +/- 10% , so the lowest volts supplied should be no lower than 108 volts. Incandescent lamps and electric heat will work fine on 100 volts. But any motors may overheat using 100 volts. Volts is usually changed on the...
The question I have is that my generator is only putting out about 100v. I would like to know if this will cause damage to anything that is running off the generator. Correct me if I am wrong but don't most appliances run between 110 and 120. I was told that the output of the generator could vary...
I am interested in purchasing a 5000 to 6200 watt portable generator to use during power outages. What are the safety concerns such as rain, snow, how far from any structues must it be used, and can it be placed on a deck? Also would like to here any recommendations as to what model and...
View more questions Search
|
