Ask Experts Questions for FREE Help !
Ask
    halzhu's Avatar
    halzhu Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 28, 2011, 01:24 PM
    Goodman furnace will not ignite
    LED on the control stead on (normal -- no flashes). When set up the thermal stat, a call for heat seems clicking, then inducer fan is on, then seems gas is on for a few seconds. But the hot surface ignitor will not turn red. The process repeated...
    rodgerhassard's Avatar
    rodgerhassard Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Feb 28, 2011, 01:52 PM
    Clean the flame sensor...
    halzhu's Avatar
    halzhu Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Feb 28, 2011, 02:04 PM

    Thanks ! No flame at all. Because flame is on, it should first ignite. It seems no electricity to the ignitor because the ignitor will not grow to red after a few seconds of gas sound.

    LED on the control board stead on (normal -- no flashes). When set up the thermal stat, a call for heat seems clicking, then inducer fan is on, then seems gas is on for a few seconds. But the hot surface ignitor will not turn red.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Feb 28, 2011, 04:35 PM

    Check for power to igniter, if power, then igniter is bad. Let me know what you find.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace won't ignite [ 1 Answers ]

The unit itself is about 3 years old. Been acting up the last couple of days with random resetting. The circuit board has a single steady LED flash. The igniter glows bright red and I sanded the sensor, no flame. Any advice would be helpful.

Goodman furnace not ignite [ 4 Answers ]

Hi. PG&E service man checkout my Goodman furnace said the Glow Coil need to replace. Like to find out where is the Glow Coil located and how does it looks like? Please let me know like to get the part to replace the Glow Coil. Thank You.

Cannot get my goodman furnace to ignite [ 1 Answers ]

Help

Goodman furnace won't ignite [ 5 Answers ]

I have a Goodman 100-3 furnace. When I turn on the thermostat, the draft inducer motor starts and continues to run but the burner isn't lighting and the led has a steady blink. I have checked the rubber hose to the pressure switch as well as both inlets and all are clear. The filter is new. Any...

Goodman furnace will not ignite [ 3 Answers ]

I have a Goodman GMPN080-4 Rev 4 furnace and it will not ignite. I believe the, not sure about the tech term, flat bar that turns red hot like a stove coil has gone bad (it does nothing). I see a red LED light on the computer type panel blink 3 quick, 2 sec pause, 3 quick, 2 sec pause and so on....

View more questions Search